WT210 - Resuscitation Trolley Mild Steel - 3 x 96mm Deep Drawers, Lower Cupboard

SKU:
WT210 - Resuscitation Trolley Mild Steel - 3 x 96mm Deep Drawers, Lower Cupboard

WT210 - Resuscitation Trolley Mild Steel - 3 x 96mm Deep Drawers, Lower Cupboard

SKU:

The Mild Steel Resuscitation Trolley is supplied with a plastic drawer liner with dividers. The Trolley has a recessed liquid retaining plastic or stainless steel work surface. It is a popular resuscitation trolley incorporating a unique tamper evident system, drawer contents are secured when the cupboard is closed (security seal compatible).

Manufactured by Bristol Maid

  • Popular resuscitation trolley
  • Drawer contents are secured when the lower cupboard is closed (security seal compatible)
  • Upper drawer supplied with a plastic drawer liner, with dividers
  • Recessed liquid retaining stainless steel work surface (usable 630 x 445)
  • Lift up work flap (usable 305 x 455mm)
  • Two hook infusion pole mounted to rear of trolley
  • Low level bumper bar
  • Push handles one end
  • 125mm pressed steel castors
  • CE Marked
WT/DEFIB - Adjustable Defibrillator Platform
  • Defibrillator supported on a 365mm wide platform & is held securely in place using a clamp (adjusts using a handwheel 205 - 380mm)
  • Platform mounted on an arm that swings 90 degrees from the worksurface & can be locked in position using a tensioning knob (rotates 360 degrees)
  • Base of platform sits 150mm above the top of the trolley
  • Fitted to the rear left-hand side of the trolley
  • Maximum capacity 6kg
  • Factory fitted

DIMENSIONS (W X D X H)

  • Overall Dimensions - 477 x 365 x 642mm (increases overall height by 185mm)
  • Weight - 5.5kg

STANDARD COLOURS
  • Paint - Grey White
WT/SPS - Suction Pump Shelf
  • Provides an area 415 x 200mm (W x D)
  • 30mm upstand at front of shelf
  • Floor to base of shelf at height - 260mm
  • Corner bumpers offer protection to both the trolley & fabric of the building
  • Maximum capacity 15kg
  • Factory fitted
DIMENSIONS (W X D X H)
  • Overall Dimensions - 420 x 205 x 380mm
  • Weight - 5kg
STANDARD COLOURS
  • Paint - Red
WT/CBOARD - Cardiac Board 1.5kg
  • Solid polyethylene cardiac board, approx 500 x 400 x 17mm
  • Positioned at the rear of the trolley for easy access
  • Factory fitted
      WT/DT - Drawer Tidy 1.6kg
      • Plastic drawer liner with removable dividers
      • One tidy supplied as standard with each trolley
          Cylinder Holders

          - WT/CYL/D/E Cylinder Holder - AD, CD, D, DD, PD, RD, ZD & E Size 3.0kg

          - WT/CYL/F Cylinder Holder - F, LF, VF, HX & ZX Size 3.4kg

          • WT/CYL/D/E compatible with AD, CD, D, DD, PD, RD, ZD & E cylinders, max diameter 100mm
          • WT/CYL/F compatible with F, LF, VF, HX & ZX cylinders, max diameter 145mm
          • Maximum two-cylinder holders per trolley
            G/RAIL- C - Guard Rail 1.5kg
            • Stainless steel guard rail
            • Increases the height of the trolley by 60mm
            • Factory fitted
            2PLCO026 - Security Seals
            • Snap on plastic security
            • Pack of 100
            C012 - Heavy Duty Castors 5.0kg
            • 2 x Braking, 2 x Non-Braking (set of 4)
            • 125mm heavy duty pressed steel castors
            • Offers additional cushioning, lowering noise levels
            • Factory fitted

            Drawer Configuration Options

             Code Description Overall Dimensions (W x D x H) Weight
            WT200 2 x 70mm & 1 x 155mm Deep Drawers, Lower Cupboard  825 x 575 x 999mm  74kg
            WT210 3 x 96mm Deep Drawers, Lower Cupboard 825 x 575 x 999mm  75.1kg
            WT250 4 x 70mm & 1 x 155mm Deep Drawers, Lower Cupboard 825 x 575 x 1165mm  86kg

            DIMENSIONS (W X D X H)

            • Drawers (internal) - 96mm - 600 x 430 x 96mm
            • Lower Cupboard (internal) - 625 x 475 x 295mm

            STANDARD COLOURS

            • Paint - Red
            • Lift Up Flap - White
            Recently viewed